Professional Furnace Installation Services

A furnace only heats well when it matches the property. Every furnace installation starts with a review of your space, current heating equipment, ductwork, venting, and fuel or power supply.

Based on that review, we recommend the right furnace capacity and configuration, and tell you whether the existing ductwork and connections can be reused or need upgrades. If you are replacing an older unit, we confirm the new equipment will work with your current setup.

Our furnace installation services cover equipment placement, gas or electrical connections, venting, duct connections, thermostat and controls, and final testing. Each step follows manufacturer requirements and the codes that apply to your property, so the system runs safely and efficiently from day one. Furnace installation is part of our full range of heating services in NYC.

When Should You Install or Replace a Furnace?

A new furnace or furnace replacement may be the right move if you are:

  • Installing heating in a new or renovated space
  • Replacing a furnace that is 15 or more years old
  • Paying for repeated furnace repairs
  • Seeing heating bills rise without explanation
  • Dealing with uneven heat or cold rooms
  • Replacing equipment after a major failure
  • Upgrading to a more efficient furnace
  • Converting from another heating system

Not sure whether to repair or replace? Start with a diagnosis from our furnace repair team.

Our Furnace Installation Process

Every furnace installation follows five clear stages, so you know what happens and when.

Step 1

Property and System Assessment

We review your property layout, existing heating equipment, ductwork, venting, and fuel or power supply. This shows what the new system needs and what can stay in place.
Step 2

Installation Planning

We confirm the furnace location, gas or electrical requirements, venting route, and duct connections. We also plan safe removal of the old furnace so the work runs on schedule.
Step 3

System Sizing and Equipment Selection

We calculate the heating load from square footage, layout, insulation, windows, and NYC winter conditions. Correct sizing prevents short cycling, uneven heat, and wasted energy, and guides the choice of furnace model and efficiency.
Step 4

Professional Installation

Our licensed technicians install the furnace, connect gas or power, venting, and ductwork, and wire the thermostat and controls to manufacturer specifications.
Step 5

Testing and Commissioning

We start the system, check ignition, airflow, temperature rise, venting, and safety controls, and set the thermostat. Before we leave, we review the results and explain basic care of your new furnace.

Furnace Installation Cost in NYC

Furnace installation cost depends on the equipment you choose and the work your property needs. The main factors are:

  • Furnace size, capacity, and efficiency rating
  • Fuel type: natural gas, oil, or electric
  • Property size, layout, and furnace location
  • Ductwork repairs, changes, or new duct runs
  • Venting, gas line, or electrical upgrades
  • Removal of the existing furnace and site access

The most accurate way to price a furnace installation is an on-site assessment. We review your property, explain the options, and give you a clear written quote before any work begins, so there are no surprises.

Get A Free Quote

Residential and Commercial Furnace Installation

We install furnaces for homeowners, business owners, and property managers across New York City.

Residential Furnace Installation

Our residential furnace installation service covers single-family houses, townhomes, apartments, and other homes. We look at room layout, heating load, insulation, and where the equipment can go. In apartments and multifamily buildings, we first confirm whether the furnace serves one unit or connects to shared building systems. The result is steady, even heat and lower energy bills all winter.

Commercial Furnace Installation

For commercial furnace installation, we work with offices, retail stores, restaurants, multifamily buildings, and other facilities. We plan around operating hours, occupancy, and heating demand to keep disruption low and size equipment for the building’s real load. For larger building projects, see our commercial HVAC services.

Why Choose Universal Services Corp. for Furnace Installation?

As a local furnace installation company, we focus on correct sizing, clean installation, and clear communication. You get an honest recommendation, a written quote, and a system that is tested before we leave.

1

Since 1996. 30 years of heating experience in New York City and Long Island.

2

Licensed & Certified HVAC Technicians. Professional assessment, sizing, and furnace installation by trained technicians.

3

Professional Setup & Testing. Every furnace is installed, configured, and tested for safe operation before completion.

4

Local NYC Service. Fast scheduling across the five boroughs and nearby Long Island communities.

Verified Reviews From Our Clients

Our Service Area

Universal Services Corp is proud to be businesses in:

  • Manhattan, NY
  • Brooklyn, NY
  • Staten Island, NY
  • Queens, NY
  • Astoria, NY
  • Flushing, NY
  • Long Island City, NY
  • Forest Hills, NY
  • Jackson Heights, NY
  • Jamaica, NY
  • Bayside, NY
  • Ridgewood, NY
  • Elmhurst, NY
  • Corona, NY
  • Bronx, NY
  • Long Island, NY
  • Hempstead, NY
  • Brookville, NY
  • Garden City, NY
  • Great Neck, NY
  • Manhasset, NY
  • Oyster Bay, NY
  • Massapequa, NY
  • Hicksville, NY
  • Glen Cove, NY
  • Jericho, NY
  • Long Beach, NY
  • Mineola, NY
  • Port Washington, NY
  • Roslyn, NY
  • Syosset, NY
  • Valley Stream, NY
  • Rockville Centre, NY
  • Bethpage, NY
  • Farmingdale, NY
  • Floral Park, NY

FAQ

How much does furnace installation cost in NYC?

Furnace installation cost depends on furnace size and efficiency, fuel type, ductwork and venting needs, electrical or gas line work, and removal of old equipment. Every property is different, so we provide a free on-site assessment and a written quote before work begins.

How long does furnace installation take?

Most residential furnace replacements are completed in one day. New furnace installation, ductwork changes, or commercial projects can take two to three days or more. After the assessment, we give you a clear timeline so you can plan around the work.

When should I replace my furnace instead of repairing it?

Replacement makes sense when a furnace is around 15 years old or more, needs frequent repairs, has a cracked heat exchanger, or no longer heats evenly. If a repair would cost close to half the price of a new furnace, replacement is usually the better long-term value.

Do you offer furnace installation near me in NYC and Long Island?

Yes. We provide furnace installation services in Manhattan, Brooklyn, Queens, the Bronx, Staten Island, and Long Island communities including Garden City, Great Neck, Hempstead, and Hicksville. See our service area for all locations.

Do you install furnaces for residential and commercial properties?

Yes. We handle residential furnace installation for houses and apartments, and commercial furnace installation for offices, retail spaces, restaurants, and multifamily buildings. Each project starts with an assessment of the property’s heating needs.

Schedule Heat Pump Installation in NYC

Discuss your heat pump installation with our team. Share your property’s location, existing equipment, and heating and cooling needs so we can review suitable options. We will help you plan the system assessment, equipment selection, and installation work for your residential or commercial property in NYC

Book a consultation

Want to know more about our services or need expert consultation?

Just fill out the form below and one of our experienced team members will get back to you promptly.

Contact Us

Your form has been succesfully submitted!
Please, check if the info you provided is correct: